Some tyres come off clean and some do not, and a changer without an assist arm means your team is muscling through the stiff ones by hand every time. This semi-automatic tyre bay package pairs the U2011 tyre changer, built with assist arm operation, with the GEO PRO U500 wheel balancer, so the harder jobs get mechanical help rather than relying on effort alone, and the whole bay arrives matched and ready in one order.
This package includes the following products:
How the U2011 and U500 handle the harder end of tyre bay work
The U2011 runs a 1.1kW motor delivering 1078Nm of turntable torque, with external clamping from 10 to 21 inches and internal clamping to 22 inches, giving the assist arm real force to work with on tight or corroded beads. The U500 balances the same range of wheels coming off it, taking automatic data input on wheel diameter and offset so the operator is not manually entering figures between jobs. Both machines run on single phase power, keeping the bay's electrical setup consistent across the two.
What assist arm operation changes for the team using it every day
A tyre changer without an assist arm turns every stubborn wheel into a physical job, and over a full day of stiff beads and corroded rims that adds up in a way that shows in your team's energy by the afternoon. The U2011's assist arm takes that strain out of the harder jobs, so throughput does not drop off as the day goes on and nobody is reaching for extra tools to force a tyre off by hand. Paired with a balancer that takes automatic measurements rather than manual entry, the two machines together mean fewer points where a rushed job introduces an error, and a bay that keeps its pace through a full schedule of wheels rather than slowing down on the difficult ones.
Backed by CE certification and a two year parts warranty on both machines
Both the U2011 tyre changer and the U500 wheel balancer carry full CE approval and come with a full two year parts warranty as standard, giving you the same defined support period across the whole bay.
Place your order today and your lead time will be confirmed upon order. If you have restricted access or specific delivery requirements, call us on 0203 5767 937 before ordering and we will plan the delivery around your site.
| Specification (U2011 Tyre Changer) | Detail |
|---|---|
| External Clamping | 10"-21" |
| Internal Clamping | 12"-24" |
| Maximum Wheel Diameter | 41"/1040mm |
| Maximum Wheel Width | 14"/355mm |
| Required Air Supply | 8-10 Bar |
| Motor Power | 1.1kW |
| Turntable Rotation Torque | 1078Nm |
| Crated Weight | 229kg |
| Crated Dimensions | 960mm x 760mm x 800mm |
| Assembled Weight | 207kg |
| Specification (U500 Wheel Balancer) | Detail |
| Balancing Modes | 6 |
| Balancing Speed | 200rpm |
| Rim Diameter | 10"-24" |
| Rim Width | 1.5"-20" |
| Measuring Time | 8s |
| Balancing Precision | ±1g |
| Single Phase | 220V/50Hz |
| Motor Power | 200W |
| Noise Level | <70dB |
| Maximum Wheel Weight | 65kg |
| Crated Dimensions | 915mm x 760mm x 1180mm |
| Assembled Weight | 96kg |
Shipping is FREE on all orders to customers within mainland UK.
We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
Want to know about our Returns Policy? Read more here.
Order Confirmation:
As soon as you place your order you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorised your credit card for the purchase.
As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.
If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.
We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.
If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk
International Orders:
Please be aware that we currently only ship to the UK.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.
If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging.
If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.
Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.
Manufacturer-Approved Products Only
Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.
UK Certified Without Exceptions
All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.
Free Delivery to UK Mainland
All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.
Full Manufacturer Warranty Intact
Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.
Lifetime Support, As Long As You Need It.
Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.
Straight Answers, No Runaround
If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.
Some tyres come off clean and some do not, and a changer without an assist arm means your team is muscling through the stiff ones by hand every time. This semi-automatic tyre bay package pairs the U2011 tyre changer, built with assist arm operation, with the GEO PRO U500 wheel balancer, so the harder jobs get mechanical help rather than relying on effort alone, and the whole bay arrives matched and ready in one order.
This package includes the following products:
How the U2011 and U500 handle the harder end of tyre bay work
The U2011 runs a 1.1kW motor delivering 1078Nm of turntable torque, with external clamping from 10 to 21 inches and internal clamping to 22 inches, giving the assist arm real force to work with on tight or corroded beads. The U500 balances the same range of wheels coming off it, taking automatic data input on wheel diameter and offset so the operator is not manually entering figures between jobs. Both machines run on single phase power, keeping the bay's electrical setup consistent across the two.
What assist arm operation changes for the team using it every day
A tyre changer without an assist arm turns every stubborn wheel into a physical job, and over a full day of stiff beads and corroded rims that adds up in a way that shows in your team's energy by the afternoon. The U2011's assist arm takes that strain out of the harder jobs, so throughput does not drop off as the day goes on and nobody is reaching for extra tools to force a tyre off by hand. Paired with a balancer that takes automatic measurements rather than manual entry, the two machines together mean fewer points where a rushed job introduces an error, and a bay that keeps its pace through a full schedule of wheels rather than slowing down on the difficult ones.
Backed by CE certification and a two year parts warranty on both machines
Both the U2011 tyre changer and the U500 wheel balancer carry full CE approval and come with a full two year parts warranty as standard, giving you the same defined support period across the whole bay.
Place your order today and your lead time will be confirmed upon order. If you have restricted access or specific delivery requirements, call us on 0203 5767 937 before ordering and we will plan the delivery around your site.
| Specification (U2011 Tyre Changer) | Detail |
|---|---|
| External Clamping | 10"-21" |
| Internal Clamping | 12"-24" |
| Maximum Wheel Diameter | 41"/1040mm |
| Maximum Wheel Width | 14"/355mm |
| Required Air Supply | 8-10 Bar |
| Motor Power | 1.1kW |
| Turntable Rotation Torque | 1078Nm |
| Crated Weight | 229kg |
| Crated Dimensions | 960mm x 760mm x 800mm |
| Assembled Weight | 207kg |
| Specification (U500 Wheel Balancer) | Detail |
| Balancing Modes | 6 |
| Balancing Speed | 200rpm |
| Rim Diameter | 10"-24" |
| Rim Width | 1.5"-20" |
| Measuring Time | 8s |
| Balancing Precision | ±1g |
| Single Phase | 220V/50Hz |
| Motor Power | 200W |
| Noise Level | <70dB |
| Maximum Wheel Weight | 65kg |
| Crated Dimensions | 915mm x 760mm x 1180mm |
| Assembled Weight | 96kg |
Shipping is FREE on all orders to customers within mainland UK.
We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
Want to know about our Returns Policy? Read more here.
Order Confirmation:
As soon as you place your order you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorised your credit card for the purchase.
As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.
If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.
We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.
If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk
International Orders:
Please be aware that we currently only ship to the UK.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.
If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging.
If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.
Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.
Manufacturer-Approved Products Only
Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.
UK Certified Without Exceptions
All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.
Free Delivery to UK Mainland
All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.
Full Manufacturer Warranty Intact
Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.
Lifetime Support, As Long As You Need It.
Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.
Straight Answers, No Runaround
If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.
