Most four post lifts are bought for servicing and then pressed into alignment work as an afterthought. The GEO WA4.3 lift is designed the other way around. It comes with bearing-mounted turn-plates fitted as standard and integrated rear slip plates built into the platform, so alignment work happens on the same lift you drove the vehicle onto. For a garage that does alignment regularly, removing that extra vehicle move saves time on every single job. That adds up across a week, and it means your alignment bay and your servicing bay can be the same bay.
How the GEO WA4.3 lift is built for alignment work rather than adapted to it
The platform design is the key difference. Front recesses are machined into the 4.3 metre platforms to accept the included bearing-mounted turn-plates, and rear slip plates are integrated directly rather than added on top. The result is a stable, level surface where the vehicle sits correctly for alignment from the moment it drives on. The air-operated locking mechanism holds the lift securely at working height without reliance on mechanical pins that need manual checking. The 2.2kW motor runs on 1 or 3 phase supply depending on what your garage has available, and lifts to a maximum height of 1,850mm with a minimum raised height of 205mm. Platform width is 480mm per rail with 1,000mm between them, fitting the full range of car and light van wheel tracks you would expect to see in a busy garage.
What it means to run a garage where alignment and servicing happen on the same equipment
Wheel alignment is a high-margin service. The problem for most garages is that it ties up a dedicated bay and a dedicated lift, which means the cost of the equipment is sitting idle whenever the alignment lift is not in use. The GEO 4.3 metre lift changes that equation. Because it is built for alignment from the outset, not adapted for it, it can carry out servicing, inspection and alignment work on the same footprint. That means the lift is earning its place in your garage across more hours of the day.
The two-year parts warranty and the powder-coated finish on the steelwork mean you are not looking at a lift that needs attention within the first couple of years. When a piece of equipment this size goes wrong it costs you not just the repair but the lost revenue from a bay that cannot be used. Knowing the warranty is in place and the finish is built for a working environment takes that concern off the table.
How the GEO lift has been independently verified for professional use in the UK
The GEO WA4.3 lift carries full UK CE certification. To achieve that certification the lift was load tested to 150 percent of its stated safe working load using solid steel ingots. The lift was required to raise that load and remain elevated for a prolonged period with all components completely intact. That is not a desk-based assessment. It is a physical test of the actual structure under conditions beyond what any vehicle in your garage will put it under.
GEO hold UK CE certifications across their entire four post lift range, and this lift conforms to all current UK and European safety regulations. All GEO four post wheel alignment lifts come with a full two-year parts warranty.
The GEO WA4.3 lift gives your garage a 4,000kg alignment-ready platform that doubles as a full-capacity servicing lift, with CE certification, turn-plates and slip plates included and a two-year parts warranty from the manufacturer. If that is the equipment your garage needs, buy now and we will confirm lead time and delivery details with you directly. Call us on 0203 5767 937 to discuss delivery logistics.
| Specification | Detail |
|---|---|
| Lifting Capacity | 4000kg |
| Max Lifting Height | 1850mm |
| Min Lifting Height | 205mm |
| Overall Height | 2220mm |
| Overall Width | 3545mm |
| Platform Length | 4300mm |
| Platform Width | 480mm |
| Space Between Platforms | 1000mm |
| Electrical Supply | 1 or 3 Phase |
| Motor Power | 2.2kW |
Shipping is FREE on all orders to customers within mainland UK.
We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
Want to know about our Returns Policy? Read more here.
Order Confirmation:
As soon as you place your order you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorised your credit card for the purchase.
As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.
If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.
We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.
If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk
International Orders:
Please be aware that we currently only ship to the UK.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.
If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging.
If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.
Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.
Manufacturer-Approved Products Only
Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.
UK Certified Without Exceptions
All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.
Free Delivery to UK Mainland
All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.
Full Manufacturer Warranty Intact
Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.
Lifetime Support, As Long As You Need It.
Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.
Straight Answers, No Runaround
If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.
Most four post lifts are bought for servicing and then pressed into alignment work as an afterthought. The GEO WA4.3 lift is designed the other way around. It comes with bearing-mounted turn-plates fitted as standard and integrated rear slip plates built into the platform, so alignment work happens on the same lift you drove the vehicle onto. For a garage that does alignment regularly, removing that extra vehicle move saves time on every single job. That adds up across a week, and it means your alignment bay and your servicing bay can be the same bay.
How the GEO WA4.3 lift is built for alignment work rather than adapted to it
The platform design is the key difference. Front recesses are machined into the 4.3 metre platforms to accept the included bearing-mounted turn-plates, and rear slip plates are integrated directly rather than added on top. The result is a stable, level surface where the vehicle sits correctly for alignment from the moment it drives on. The air-operated locking mechanism holds the lift securely at working height without reliance on mechanical pins that need manual checking. The 2.2kW motor runs on 1 or 3 phase supply depending on what your garage has available, and lifts to a maximum height of 1,850mm with a minimum raised height of 205mm. Platform width is 480mm per rail with 1,000mm between them, fitting the full range of car and light van wheel tracks you would expect to see in a busy garage.
What it means to run a garage where alignment and servicing happen on the same equipment
Wheel alignment is a high-margin service. The problem for most garages is that it ties up a dedicated bay and a dedicated lift, which means the cost of the equipment is sitting idle whenever the alignment lift is not in use. The GEO 4.3 metre lift changes that equation. Because it is built for alignment from the outset, not adapted for it, it can carry out servicing, inspection and alignment work on the same footprint. That means the lift is earning its place in your garage across more hours of the day.
The two-year parts warranty and the powder-coated finish on the steelwork mean you are not looking at a lift that needs attention within the first couple of years. When a piece of equipment this size goes wrong it costs you not just the repair but the lost revenue from a bay that cannot be used. Knowing the warranty is in place and the finish is built for a working environment takes that concern off the table.
How the GEO lift has been independently verified for professional use in the UK
The GEO WA4.3 lift carries full UK CE certification. To achieve that certification the lift was load tested to 150 percent of its stated safe working load using solid steel ingots. The lift was required to raise that load and remain elevated for a prolonged period with all components completely intact. That is not a desk-based assessment. It is a physical test of the actual structure under conditions beyond what any vehicle in your garage will put it under.
GEO hold UK CE certifications across their entire four post lift range, and this lift conforms to all current UK and European safety regulations. All GEO four post wheel alignment lifts come with a full two-year parts warranty.
The GEO WA4.3 lift gives your garage a 4,000kg alignment-ready platform that doubles as a full-capacity servicing lift, with CE certification, turn-plates and slip plates included and a two-year parts warranty from the manufacturer. If that is the equipment your garage needs, buy now and we will confirm lead time and delivery details with you directly. Call us on 0203 5767 937 to discuss delivery logistics.
| Specification | Detail |
|---|---|
| Lifting Capacity | 4000kg |
| Max Lifting Height | 1850mm |
| Min Lifting Height | 205mm |
| Overall Height | 2220mm |
| Overall Width | 3545mm |
| Platform Length | 4300mm |
| Platform Width | 480mm |
| Space Between Platforms | 1000mm |
| Electrical Supply | 1 or 3 Phase |
| Motor Power | 2.2kW |
Shipping is FREE on all orders to customers within mainland UK.
We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
Want to know about our Returns Policy? Read more here.
Order Confirmation:
As soon as you place your order you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorised your credit card for the purchase.
As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.
If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.
We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.
If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk
International Orders:
Please be aware that we currently only ship to the UK.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.
If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging.
If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.
Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.
Manufacturer-Approved Products Only
Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.
UK Certified Without Exceptions
All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.
Free Delivery to UK Mainland
All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.
Full Manufacturer Warranty Intact
Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.
Lifetime Support, As Long As You Need It.
Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.
Straight Answers, No Runaround
If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.
