Skip to content

GEO SP4.6 4 Post 4.6 Metre Vehicle Lift with 4000kg Certified Lifting Capacity

by GEO
£4,165.00
+ VAT

Notify me when back in stock

Description

Four tonnes of certified lifting capacity across 4.6 metres of platform.

A lift with a 4000kg capacity and 4.6 metre platform handles everything from hatchbacks to light commercials, keeping your bay productive and your workflow moving. With a full UK CE certification, a 4000kg capacity and a platform long enough to take whatever drives in, the SP4.6 lift is built for your garage. 

How 150 per cent load testing gives you a lift you can push without hesitation

The certification behind this lift exceeds standard compliance requirements. Each unit has been proof tested to 150% of its 4,000kg safe working load using solid steel ingots, which are elevated and held under load for an extended period while maintaining the integrity of all components. This is the result of rigorous physical testing conducted by UK based engineers. In practical terms, this provides assurance that the lift has a substantial built-in safety margin, supported by proven structural performance rather than stated specifications.

  • The air locking mechanism provides positive locking at height on every use, removing reliance on manual engagement or operator memory.
  • The powder-coated finish resists the daily wear and tear of a busy workshop, helping the lift maintain its appearance over time.
  • The lift is available with either a single-phase or three-phase power supply, allowing installation into most existing electrical setups without the need for a dedicated circuit upgrade.
  • An optional manual jacking beam can be specified at the point of order (£695 + VAT), providing access to brakes and suspension components while the vehicle remains elevated.

What a lift this capable does for the pace and range of your garage

A platform of 4.6 metres accommodates vehicles that shorter lifts cannot take. Vans, longer wheelbase cars and light commercials all fit comfortably, which means you are not turning work away or improvising with ramps when an unusual vehicle comes in. The 1850mm maximum lift height gives proper clearance underneath for servicing, inspection and repair work without having to crouch or strain. This is essential when spending hours at a time under a car.

The minimum height of 205mm is low enough to take most standard vehicles without ramps or approach aids. Because the platform is flat rather than rail based, the drive-on process is straightforward regardless of vehicle width, right up to the 3546mm overall width of the lift itself.

Independently certified to UK and European standards

This lift carries full UK CE certification, assessed against current UK and European safety regulations. The certification process required load testing to 150 per cent of the stated safe working load, carried out with solid steel ingots and held at elevation. 

Power Supply Options: Available in single-phase and three-phase configurations. Let us know which you need when you order, or contact us beforehand if you're not sure, we'll confirm the right option before your order is processed.

With a 4.6 metre platform and 4000kg certified capacity, this lift is designed for garages managing a continuous volume of vehicles. Buy today, call us on 0203 5767 937 to discuss lead times or if your site has specific access restrictions or unique requirements that need addressing.

Specification
Specification Detail
Lifting Capacity 4000kg
Maximum Lifting Height 1850mm
Minimum Lifting Height 205mm
Overall Height 2222mm
Overall Width 3546mm
Platform Length 4600mm
Platform Width 508mm
Space Between Platforms 1000-1100mm
Motor Power 2.2kW
Electrical Supply 1 or 3 Phase
Shipping

Shipping is FREE on all orders to customers within mainland UK. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Want to know about our Returns Policy? Read more here.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment.  If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk

International Orders:

Please be aware that we currently only ship to the UK. 

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.

Why Buy From Us?

Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.

Manufacturer-Approved Products Only

Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.

UK Certified Without Exceptions

All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.

Free Delivery to UK Mainland

All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.

Full Manufacturer Warranty Intact

Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.

Lifetime Support, As Long As You Need It.

Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.

Straight Answers, No Runaround

If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.

Description

Four tonnes of certified lifting capacity across 4.6 metres of platform.

A lift with a 4000kg capacity and 4.6 metre platform handles everything from hatchbacks to light commercials, keeping your bay productive and your workflow moving. With a full UK CE certification, a 4000kg capacity and a platform long enough to take whatever drives in, the SP4.6 lift is built for your garage. 

How 150 per cent load testing gives you a lift you can push without hesitation

The certification behind this lift exceeds standard compliance requirements. Each unit has been proof tested to 150% of its 4,000kg safe working load using solid steel ingots, which are elevated and held under load for an extended period while maintaining the integrity of all components. This is the result of rigorous physical testing conducted by UK based engineers. In practical terms, this provides assurance that the lift has a substantial built-in safety margin, supported by proven structural performance rather than stated specifications.

  • The air locking mechanism provides positive locking at height on every use, removing reliance on manual engagement or operator memory.
  • The powder-coated finish resists the daily wear and tear of a busy workshop, helping the lift maintain its appearance over time.
  • The lift is available with either a single-phase or three-phase power supply, allowing installation into most existing electrical setups without the need for a dedicated circuit upgrade.
  • An optional manual jacking beam can be specified at the point of order (£695 + VAT), providing access to brakes and suspension components while the vehicle remains elevated.

What a lift this capable does for the pace and range of your garage

A platform of 4.6 metres accommodates vehicles that shorter lifts cannot take. Vans, longer wheelbase cars and light commercials all fit comfortably, which means you are not turning work away or improvising with ramps when an unusual vehicle comes in. The 1850mm maximum lift height gives proper clearance underneath for servicing, inspection and repair work without having to crouch or strain. This is essential when spending hours at a time under a car.

The minimum height of 205mm is low enough to take most standard vehicles without ramps or approach aids. Because the platform is flat rather than rail based, the drive-on process is straightforward regardless of vehicle width, right up to the 3546mm overall width of the lift itself.

Independently certified to UK and European standards

This lift carries full UK CE certification, assessed against current UK and European safety regulations. The certification process required load testing to 150 per cent of the stated safe working load, carried out with solid steel ingots and held at elevation. 

Power Supply Options: Available in single-phase and three-phase configurations. Let us know which you need when you order, or contact us beforehand if you're not sure, we'll confirm the right option before your order is processed.

With a 4.6 metre platform and 4000kg certified capacity, this lift is designed for garages managing a continuous volume of vehicles. Buy today, call us on 0203 5767 937 to discuss lead times or if your site has specific access restrictions or unique requirements that need addressing.

Specification
Specification Detail
Lifting Capacity 4000kg
Maximum Lifting Height 1850mm
Minimum Lifting Height 205mm
Overall Height 2222mm
Overall Width 3546mm
Platform Length 4600mm
Platform Width 508mm
Space Between Platforms 1000-1100mm
Motor Power 2.2kW
Electrical Supply 1 or 3 Phase
Shipping

Shipping is FREE on all orders to customers within mainland UK. 

We don't want to mess around with fine print and extra charges, we like things to be simple and easy. 

Want to know about our Returns Policy? Read more here.

Order Confirmation:

As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorised your credit card for the purchase.  

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment.  If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.  

If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.

Order Shipment:

If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.  

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk

International Orders:

Please be aware that we currently only ship to the UK. 

Damages:

Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. 

If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.

Why Buy From Us?

Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.

Manufacturer-Approved Products Only

Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.

UK Certified Without Exceptions

All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.

Free Delivery to UK Mainland

All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.

Full Manufacturer Warranty Intact

Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.

Lifetime Support, As Long As You Need It.

Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.

Straight Answers, No Runaround

If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.