A single post design means you are not working around two upright posts every time you get underneath a car. This lift takes 2800kg and reaches 1.8m, giving you full standing access to brakes, exhausts and underside work while the post itself sits out of the way to one side rather than in the middle of your workspace. For a mobile bay or a garage that cannot spare the floor space a two post system demands, that difference is what makes the job workable at all.
How the SPM2800 supports a full 2800kg load from a single point
The lift runs on two stage arms with double height screw pads, which spread and secure the contact points under the vehicle rather than relying on a single lifting position. An electromagnetic safety release system holds the arms in place once locked, and the arm locking mechanism is built to the EN1493 directive, the specific engineering standard for vehicle lifts. Every moving component is galvanised, which matters for a lift that may see outdoor use given its stated -5°C to 40°C working range.
What a mobile single post lift means for a garage without space to spare
If your bay cannot accommodate a full two post lift, this is the difference between turning underside work away and taking it on properly instead of relying on a trolley jack and axle stands. The double height screw pads and 70mm pad extensions mean your team is not improvising a lifting point on a van or 4x4 that was not designed for a standard car lift, which is where a lot of avoidable damage happens. Knowing the arm locking meets the EN1493 directive gives you something concrete to point to if a customer or an inspector ever asks how the vehicle was supported, rather than a vague assurance that it is safe. For a mobile operation or a tight bay, that combination of proper standing access and a defined engineering standard behind it is what lets you take on the work with confidence rather than working around the limitations of a jack and stands.
Backed by CE certification and a 12 month manufacturer's warranty
The GEO SPM2800 is CE certified and fully conforms to current UK and EU regulations for lifting equipment. It carries a 12 month manufacturer's warranty, giving you a defined support period from the date it goes into your garage.
Place your order today and your lead time will be confirmed upon order. If you have restricted access or specific delivery requirements, call us on 0203 5767 937 before ordering and we will plan the delivery around your site.
| Specification | Detail |
|---|---|
| Lifting Capacity | 2800kg |
| Maximum Lifting Height | 1.8m |
| Lifted Vehicle Width | ≤1.8m |
| Lifting Speed | 40mm/s |
| Motor Power | 2.2kW |
| Single Phase | 240V/50Hz |
| Frequency | 50Hz/60Hz |
| Oil Pressure | 111.5MPa |
| Approx Single Post Mass | 750kg |
| Noise | 60dB |
| Overall Dimensions | 1850mm x 1400mm x 2500mm |
| Insulation Grade | IP64 |
| Working Environment Temperature | -5°C - 40°C |
| Working Environment | Both Indoor and Outdoors |
Shipping is FREE on all orders to customers within mainland UK.
We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
Want to know about our Returns Policy? Read more here.
Order Confirmation:
As soon as you place your order you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorised your credit card for the purchase.
As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.
If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.
We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.
If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk
International Orders:
Please be aware that we currently only ship to the UK.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.
If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging.
If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.
Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.
Manufacturer-Approved Products Only
Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.
UK Certified Without Exceptions
All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.
Free Delivery to UK Mainland
All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.
Full Manufacturer Warranty Intact
Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.
Lifetime Support, As Long As You Need It.
Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.
Straight Answers, No Runaround
If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.
A single post design means you are not working around two upright posts every time you get underneath a car. This lift takes 2800kg and reaches 1.8m, giving you full standing access to brakes, exhausts and underside work while the post itself sits out of the way to one side rather than in the middle of your workspace. For a mobile bay or a garage that cannot spare the floor space a two post system demands, that difference is what makes the job workable at all.
How the SPM2800 supports a full 2800kg load from a single point
The lift runs on two stage arms with double height screw pads, which spread and secure the contact points under the vehicle rather than relying on a single lifting position. An electromagnetic safety release system holds the arms in place once locked, and the arm locking mechanism is built to the EN1493 directive, the specific engineering standard for vehicle lifts. Every moving component is galvanised, which matters for a lift that may see outdoor use given its stated -5°C to 40°C working range.
What a mobile single post lift means for a garage without space to spare
If your bay cannot accommodate a full two post lift, this is the difference between turning underside work away and taking it on properly instead of relying on a trolley jack and axle stands. The double height screw pads and 70mm pad extensions mean your team is not improvising a lifting point on a van or 4x4 that was not designed for a standard car lift, which is where a lot of avoidable damage happens. Knowing the arm locking meets the EN1493 directive gives you something concrete to point to if a customer or an inspector ever asks how the vehicle was supported, rather than a vague assurance that it is safe. For a mobile operation or a tight bay, that combination of proper standing access and a defined engineering standard behind it is what lets you take on the work with confidence rather than working around the limitations of a jack and stands.
Backed by CE certification and a 12 month manufacturer's warranty
The GEO SPM2800 is CE certified and fully conforms to current UK and EU regulations for lifting equipment. It carries a 12 month manufacturer's warranty, giving you a defined support period from the date it goes into your garage.
Place your order today and your lead time will be confirmed upon order. If you have restricted access or specific delivery requirements, call us on 0203 5767 937 before ordering and we will plan the delivery around your site.
| Specification | Detail |
|---|---|
| Lifting Capacity | 2800kg |
| Maximum Lifting Height | 1.8m |
| Lifted Vehicle Width | ≤1.8m |
| Lifting Speed | 40mm/s |
| Motor Power | 2.2kW |
| Single Phase | 240V/50Hz |
| Frequency | 50Hz/60Hz |
| Oil Pressure | 111.5MPa |
| Approx Single Post Mass | 750kg |
| Noise | 60dB |
| Overall Dimensions | 1850mm x 1400mm x 2500mm |
| Insulation Grade | IP64 |
| Working Environment Temperature | -5°C - 40°C |
| Working Environment | Both Indoor and Outdoors |
Shipping is FREE on all orders to customers within mainland UK.
We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
Want to know about our Returns Policy? Read more here.
Order Confirmation:
As soon as you place your order you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorised your credit card for the purchase.
As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via e-mail to see if alternate arrangements can be made.
If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.
Order Shipment:
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.
We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.
If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at sales@zenticautomotive.co.uk
International Orders:
Please be aware that we currently only ship to the UK.
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.
If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging.
If your item(s) do arrived damaged please send photos to sales@zenticautomotive.co.uk, then visit our Returns page and lodge your return claim online.
Buying workshop equipment at this level is a serious investment. Here is what you can expect when you buy from us.
Manufacturer-Approved Products Only
Every product on Zentic has been sourced directly through manufacturer-approved channels. If it does not meet certification and quality standards, it does not appear on our site.
UK Certified Without Exceptions
All equipment listed is independently verified to meet UK safety and regulatory standards. You will always find full certification details on the product page.
Free Delivery to UK Mainland
All orders are delivered to mainland UK addresses at no additional cost. Lead times are confirmed at the point of order. No hidden charges.
Full Manufacturer Warranty Intact
Every product is sold with the manufacturer's full warranty. We never sell grey imports or products with voided or modified warranty terms.
Lifetime Support, As Long As You Need It.
Buying the equipment is the easy part. Our support doesn't stop once your order arrives, or after the warranty period ends. If you need help with installation, have a question further down the line, or want advice before ordering parts, just give us a call or drop us an email. We're here to help whenever you need us.
Straight Answers, No Runaround
If you have a question about a product, a delivery or an order, contact us and you will speak to someone who knows the equipment. We do not outsource our customer support.
